ISM RF Module (SDR)
Table of Contents
- 2.3-2.5GHz operation, fine and courseturning steps
- 4.9-5.9GHz operation, fine and coarse tuning steps
- Programmable RX and TX gain control
- Switchable baseband antialias filters
- +20dBm power output at 3% EVM
- Receiver Noise Figure <=6dB
- Built-in switch diversity antennas (two RX and two TX)
- Iternal/External? frequency reference allows phase locking for MIMO operation
The SDR module consist of a pair of boards as shown in Figure 1.
Attachments
-
SDR-BD.jpg
(104.8 KB) - added by seskar
2 years ago.
SDR Block Diagram
![(please configure the [header_logo] section in trac.ini)](/chrome/site/your_project_logo.png)
