Wide-tuning RF Module (WDR)
Table of Contents
- RF tuning range from 300 to 7500 MHz using heterodyne downconversion and sharp IF filtering for excellent adjacent channel rejection.
- Full duplex operation over entire tuning range allows any combination of uplink and downlink frequency sets.
- Selectable receiver I/Q analog bandwidth of 7, 10, 15 or 20 MHz digital sampling rate of 64 MSps on I/Q with 12 bit ADC.
- Receiver noise figure (NF) of 6 dB, gain control of 80 dB.
- Selectable transmitter I/Q analog bandwidth of 12, 18 or 24 MHz, digital update rate of 128 MSps with 14 bit DAC.
- Transmitter output of +20 dBm minimum across entire band, 32dB gain control, carrier feedthru suppression and I/Q sideband balance control.
- Upto four radio channels can be configured asynchronously or locked together for phased or smart antenna applications.
- Accepts external GPS frequency locking for standards based timing.
- Frequency hop of less than 50usec.
- Switched antenna diversity for both TX and RX channels.
SPI block is used for control of all elements.
Attachments
-
WDR-BD.jpg
(138.7 KB) - added by seskar
2 weeks ago.
WDR Block Diagram
![(please configure the [header_logo] section in trac.ini)](/chrome/site/your_project_logo.png)
