Software/Firmware/Framework/tutorial/build/prepmatlab

  1. Start MATLAB
  2. Add paths/environment variables as defined in d:\crkit_svn\design\trunk\simulink\setup\mconfig_r3.txt (copy and paste the instructions into MATLAB command window)
  3. Open latest CRKit framework .mdl file e.g. d:\crkit_svn\design\trunk\simulink\R3\framework\framework_R3.mdl
  4. The opened framework is as shown in Figure 1. The eth_driver is for generating ethernet packet streams into the CRKit subsystem

Figure 1 - Framework R3



..

Attachments