close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/crkit does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Jun 17, 2010, 4:48:30 AM (14 years ago)
- Author:
-
khanhle
- Comment:
-
--
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v36
|
v37
|
|
56 | 56 | ||'''Instance''' ||'''Address Range'''||'''Size''' ||'''Description'''|| |
57 | 57 | ||''Reserved'' ||0x00000000-0x0FFFFFFC||- ||Future use|| |
58 | | ||''[source:/doc/trunk/architecture/R3/rmap_cmn_ctl.xls Common Control]'' ||0x10000000-0x1000FFFC||65K ||Control Plane register map e.g. SPI, LEDs, and board level IO|| |
| 58 | ||''[source:/doc/trunk/architecture/rmap/R3/cmn_ctl_rmap.xls Common Control]'' ||0x10000000-0x1000FFFC||65K ||Control Plane register map e.g. SPI, LEDs, and board level IO|| |
59 | 59 | ||''Common INTC'' ||0x10010000-0x1001FFFC||65K ||Interrupt Controller map. Individual interrupt lines from all RMAPs are consolidated in a single location. Once an interrupt is set by HW, a status messaging packet is sent to Host. Host shall read the INTC status register to identify which of the RMAP regions has triggered an interrupt e.g. coarse parsing, followed by fine parsing|| |
60 | 60 | ||''Timing Control'' ||0x10020000-0x1002FFFC||65K ||address range for timing controller|| |