== Status Packet == 

__Figure 1 - Status Packet Structure__ 
[[BR]][[BR]]
[[Image(status_pkt.jpg, 600px)]]
[[BR]][[BR]]


__Table 1 - Status Header__
||'''TYPE'''||Status packet type||
||          ||0x0100 - Interrupt message, only one Status payload field is required for INTC content||


__Table 2 - Status Payload__
||'''INTC'''||One word, content of Interrupt Controller delta register. Host needs to parse the INTC field to identify which interrupts were triggered. Refer to INTC RMAP for further information||

 * for R3, only Host -> HW status messaging is required for interrupt handling. 
 * For future revisions, we will support VITA radio transport protocol for messaging and status handling. 
 * Status header is added by Packet Processor, with payload provided by RMAP Processor. 
 * Note, UDP port 1001 is used for Status related packets.  
 


[..]