close Warning: Can't synchronize with repository "(default)" (/common/SVN/crkit does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 6 and Version 7 of crkit/Software/Firmware/Framework/tutorial/build/framework


Ignore:
Timestamp:
Nov 17, 2010, 6:31:58 PM (12 years ago)
Author:
khanhle
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • crkit/Software/Firmware/Framework/tutorial/build/framework

    v6 v7  
    44Perform following operations :
    55
    6  1. Start Xilinx ISE
     6 1. Start Xilinx ISE [[BR]]
    77 2. Open CRKit project located at d:\hw\cr_build\cr_r3_sim\cr_r3.ise . The opened project should look like as shown in Figure 1. 
    88
     
    1212[[BR]][[BR]]
    1313
    14  3. You have the option to re-synthesize the framework. Note the application module e.g. app_sub.ngc is not synthesized at this stage, this has been done within MATLAB/Simulink. To synthesize the framework, right-click on 'Synthesize - XST' in processes window, and select run or re-run. This step can be skipped if you already have synthesize the framework at an earlier stage, hence save some build time. 
     14 3. You have the option to re-synthesize the framework. Note the application module e.g. app_sub.ngc is not synthesized at this stage, this has been done within MATLAB/Simulink. To synthesize the framework, right-click on 'Synthesize - XST' in processes window, and select run or re-run. This step can be skipped if you already have synthesize the framework at an earlier stage, hence save some build time.  [[BR]]
    1515 4. Proceed with the place/route stage. Right-click on 'Implement Design' in processes window, and select run or re-run. Once this step is completed succesfully, you should see 'All Signals Completely Routed' and 'All Constraints Met' under the project status as shown in Figure 2. [[BR]][[BR]]
    1616