|Version 10 (modified by 12 years ago) ( diff ),|
- Start MATLAB
- Add paths/environment variables as defined in 'd:\crkit_svn\design\trunk\simulink\setup\mconfig_r3.txt' (copy and paste the instructions into MATLAB command window)
- Open latest CRKit framework .m file e.g. d:\crkit_svn\design\trunk\simulink\R3\framework\framework_R3.m
- The opened framework is as shown in Figure 1. The eth_driver is for generating ethernet packet streams into the CRKit subsystem
Note: See TracWiki for help on using the wiki.