== How to run a simulation == This tutorial explains how to setup and run a simulation. Note that the external simulation environment is not yet integrated into MATLAB/Simulink. To run a simulation, you need to 1. Set up the build environment as explained in "How to setup build environment" tutorial 2. Create a top level VHDL file of your design from within MATLAB (if using the provided Simulink CRKit Framework, then the top Input/Output (IO) signals should match the IOs within the testbench environment) 3. Port top file into the external testbench environment 4. Build the simulation testbench by either using the currently available testcases, or create your own test scenarios 5. Validate your design in Modelsim [..]