close Warning: Can't synchronize with repository "(default)" (/common/SVN/crkit does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 4 and Version 5 of crkit/Software/Firmware/Framework/tutorial/build/sim


Ignore:
Timestamp:
Jul 20, 2010, 4:01:52 PM (12 years ago)
Author:
khanhle
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • crkit/Software/Firmware/Framework/tutorial/build/sim

    v4 v5  
    33This tutorial explains how to setup and run a simulation. Note that the external simulation environment is not yet integrated into MATLAB/Simulink. To run a simulation, you need to
    44
    5   1. Set up the build environment as explained in "How to setup build environment" tutorial.
    6   2. Create a top level VHDL file of your design from within MATLAB (if using the provided Simulink CRKit Framework, then the top Input/Output (IO) signals should match the IOs within the testbench environment)
     5  1. Set up the build environment as explained in "How to setup build environment" tutorial
     6  2. Create a top level VHDL file of your design from within MATLAB (if using the provided Simulink CRKit Framework, then the top Input/Output (IO) signals should match the IOs within the testbench environment)
    77  3. Port top file into the external testbench environment
    8   4. Build the simulation testbench by either using the currently available testcases, or create your own test scenarios.
    9   5. Validate your design in Modelsim.
     8  4. Build the simulation testbench by either using the currently available testcases, or create your own test scenarios
     9  5. Validate your design in Modelsim
    1010
    1111